IWC Aquatimer 2000 Vs 1000

[baun]

ClausT Skrev:

Baun Skrev:Hvilket værk er der i disse ure?

vh Baun

ETA 2892, med ændringer fra IWC..... Ca. samme niveau som Omega.....

Ja jeg fandt lige denne beskrivelse - iøvrigt her på siden lagt ind af Hanover:

IWC-30110:
The caliber used in the Aquatimer is the IWC-30110, introduced in 2003 to replace the IWC-37524. The IWC-30110 is an extensively reworked ETA2892A2 caliber with 28800vph, 42-hour power reserve and automatic winding. The ETA2892A2 derives from the 18000vph 28mm ETA2890 movement, and is reduced in diameter to fit into smaller cases. The 9mm-balancewheel is supported by a cock and has an “Etachron”-fineadjustment. The ETA2892-A2 is 25.6mm in diameter and 3.6mm high.

This caliber is delivered to IWC in parts in its finest grade (chronometer-grade) that ETA delivers. Then IWC improves the caliber with new/better parts, and Nickel-plates and decorates it. The 'standard' ETA2892A2 has 21 jewels, IWC adds 2 jewels (mainspring-barrel), amongst other improvements like replacing the date-mechanism and reducing the diameter of the ball bearing of the rotor to increase winding efficiency. These improvements made by IWC throughout the complete movement makes the movement run so efficiently that the mainspring has to be replaced by a less stronger one.

IWC does the assembling and regulation completely in-house. When the watch leaves the factory, it is tested for 21 days and runs within +0...+7 sec/24H, which is a tighter tolerance than used by COSC.

Det betyder at IWC'en er helt sammenlignelig med Omega Seamaster PO - sådan set på brugtprisen og kvaliteten?

vh Baun